Tianium Ordinary Low Fin Tube

This tube type is designed with proprietary technology. The outside of the tube has a spiral fin structure, which can destroy the surface tension of steam, make the condensed liquid drip quickly, and also increase the heat exchange area;

The top of the tooth is pressed into a zigzag shape or left untreated depending on the actual situation; there is no internal thread structure in the pipe to reduce the formation of dirt in the pipe. This pipe type is suitable for condensers in thermal power plants and special occasions.

In the condenser, the condensation heat transfer coefficient can be significantly improved.

Low-finned tubes are a reliable solution for controlling the temperature of gases and liquids, or for evaporating and condensing refrigerants. Thanks to their larger heat transfer surface area, they offer considerable potential to save in terms of materials and fill volumes. The wide range of dimensions offered by Yexiang Solutions makes these products perfect for a broad scope of applications in the refrigeration and air conditioning industry, for oil/gas coolers in machinery and plant engineering, and for intermediate vapor superheaters in process engineering.

The fins are obtained by roll forming the outer surface of a plain tube. This process results in an increase in strength of the finned sections, whereas the plain ends and lands remain soft. Soft annealing of the tubes is required if they have to be suitable for bending and coiling.

Through the flow and evaporation of the refrigerant in the tube, the water is cooled outside the tube. The heat transfer coefficient in the tube is 1.5-2 times that of the light tube of the same specification, and the heat transfer capacity is significant. Corrugated spiral grooves can also be processed on the outer surface of the tube to expand the range of use. At the same time, there are also grooves in the tube that are parallel to the radial direction of the tube, that is, the spiral angle is zero degrees, which can be used for heat pipe radiators. There are smooth sections at both ends and the length can be made according to the user's requirements.

They are mainly used in the refrigeration and air-conditioning industry (refrigerant condenser and refrigerant evaporator), in machine and equipment industry (oil and gas cooler), in the process and power industry (cooler, preheater, condenser evaporator and reboiler).

Hot Tags: tianium ordinary low fin tube, China tianium ordinary low fin tube manufacturers, suppliers, factory, stainless steel gas pipe, 3 sch 10 stainless pipe, 45mm copper pipe, 1 25 stainless pipe, 2m 22mm copper pipe, 13mm stainless steel tube