Copper Ordinary Low Fin Tube

Low-finned tubes are a reliable solution for controlling the temperature of gases and liquids, or for evaporating and condensing refrigerants. Thanks to their larger heat transfer surface area, they offer considerable potential to save in terms of materials and fill volumes. The wide range of dimensions offered by Yexiang Solutions makes these products perfect for a broad scope of applications in the refrigeration and air conditioning industry, for oil/gas coolers in machinery and plant engineering, and for intermediate vapor superheaters in process engineering.

The fins are obtained by roll forming the outer surface of a plain tube. This process results in an increase in strength of the finned sections, whereas the plain ends and lands remain soft. Soft annealing of the tubes is required if they have to be suitable for bending and coiling.

Through the flow and evaporation of the refrigerant in the tube, the water is cooled outside the tube. The heat transfer coefficient in the tube is 1.5-2 times that of the light tube of the same specification, and the heat transfer capacity is significant. Corrugated spiral grooves can also be processed on the outer surface of the tube to expand the range of use. At the same time, there are also grooves in the tube that are parallel to the radial direction of the tube, that is, the spiral angle is zero degrees, which can be used for heat pipe radiators. There are smooth sections at both ends and the length can be made according to the user's requirements.

Better heat exchange performance, widely applied.

Low fin height copper tube is used in lithium bromide refrigeration absorber or evaporator.

Hot Tags: copper ordinary low fin tube, China copper ordinary low fin tube manufacturers, suppliers, factory, cost effective copper alloy tube, 1 inch soft copper tubing 100 ft, ac copper pipe 5 8 price, copper nickel alloy pipe, 3 4 inch copper pipe, corrugated copper pipe