Copper Inner Grooved Tube

Through the flow and evaporation of the refrigerant in the tube, the water is cooled outside the tube. The heat transfer coefficient in the tube is 1.5-2 times that of the light tube of the same specification, and the heat transfer capacity is significant. Corrugated spiral grooves can also be processed on the outer surface of the tube to expand the range of use. At the same time, there are also grooves in the tube that are parallel to the radial direction of the tube, that is, the spiral angle is zero degrees, which can be used for heat pipe radiators. There are smooth sections at both ends and the length can be made according to the user's requirements. The processing length is 7m.

The inner wall of the tube is basically strengthened again to minimize the formation of thermal resistance inside the tube, thereby maximizing the heat exchange capacity on both sides of the copper tube.

Commercial air conditioning heat exchangers, central air conditioning dry evaporators, electronic products and solar device heat pipe radiators, etc.

The copper tube has good thermal conductivity, electrical conductivity, corrosion resistance, processability, plasticity, weldability, pressure resistance and wear resistance. Therefore, copper tubes are suitable for many different occasions, including but not limited to condensers, heat exchangers, electrical equipment, wires and cables, submarine oil wells, desalination equipment, compressors, pumps and other fields. Copper tubes can be processed and manufactured according to specific needs to meet various application requirements.

Hot Tags: copper inner grooved tube, China copper inner grooved tube manufacturers, suppliers, factory, ac copper pipe 5 8 price, copper nickel alloy pipe, heating copper pipe, corrugated copper pipe, 22ml copper pipe, 30m 22mm copper pipe